CARBON FILTERS
Activated carbon filter is an efficient and cost effective solution for enhanced removal of offensive odors. Corrossive and pollution gases & vapors such as sulphur dioxide, chlorine, hydrogen, sulphhide, ozone, nitrogen oxides, mercaptans mercury etc.
SPECIFICATIONS
  • Type : Box/Flangs
  • Frame : Al Anodised/GI
  • Media : Impregmented Activated Carbon for high single pass efficiency
  • Gasket : Sponge / Foam / Felt (DownStream/UpStream/Both/None)
  • Sealing : Epoxy
  • Relative Humadity : <60%
APPLICATIONS
  • Pharmaceuticals & Hospitals
  • Refineries & Museums
  • Chemical Process Indusries-Fertilezers, pulp & paper, Acids and Alkalies
  • Libraries and Hotels
  • Airports
ADVANTAGES
  • Filter Media, Impregnated carbon for high single pass efficiency
  • Filters Units with multiple panels providing
    • Large Filteration Area
    • High Dwell time
    • Low pressure drop
  • Large quantiy of observent to ensure long operative life.




FCU FILTERS
Prevents and controls lint, fluff, dust particles and large visible particle build up onheating cooling coll of ventilation unit.
SPECIFICATIONS
  • Type : Pre Filter (Flat /Flange/type)
  • Frame : AI Anodized/ GI/ SS 304/ Cardboard
  • Media : Synthetic Non Woven/ Glass Fibre/ Metallic
  • Filter Classs :
    • Eurovent 4/5 : EU-2 EU3
    • BSEN 779-2002 : G-2 G-3
    • ASHRAE 52.76-2007 : MERV:2-4 MERV:5-6
    • Average Arrestance : 65-80% 80-90%
    • Efficiency : 85% down to 20 Microns
  • Face Velocity (M/Sec) : 2.5
  • Initial Pressure Drop : <4 MM of WC
APPLICATIONS
  • HVAC- for Hospitals, Hostels etc
  • Industrial Ventilation SYSTEMS
  • Food processingh Industry
  • Coarse filtration
  • Computer centers
  • Pharmaceuticals
ADVANTAGES
  • Media is fire retardant & resistant to moisture, fungi and bacteria
  • Cleanable and washable with liquid soap
  • High dust holding capacity
  • Optimum cost / performance ratio.


METALLIC FILTERS
Suitable for use in very difficult operating conditions including high velocity, high temperature, high moisture, corrosive environments, oil or grease laden air.
SPECIFICATIONS
  • Type : Box/Flange.
  • Frame : AI Anodized/ GI/ SS 304..
  • Media : Multiple layers of pleated and flat metal mesh
  • Filter Classs :
    • Eurovent 4/5 : EU-2 EU-3
    • BSEN 779-2002 : G-2 G-3
    • ASHRAE 52.76-2007 : MERV:4 MERV:5-6
    • Average Arrestance : 65-80% 80-90%
    • Efficiency : 80% down to 10 Microns
  • Face Velocity (M/Sec) : 2.5
  • Initial Pressure Drop : <3 MM of WC
  • Recommended Final Pressure Drop : <15 MM of WC
APPLICATIONS
  • HVAC
  • Industrial Ventilation SYSTEMS for Food processing, Chemical processes, Paint shops, toilets etc.
  • Coarse filtration
ADVANTAGES
  • Resistance proof media
  • Easy assembly
  • Cleanable and washable with liquid soap
  • Low initial pressure drop
  • High dust holding capacity
  • Long life.


PRE FILTERS-Pleated Type
Primarily used to extend the life of the final filters, Pre filters are highly recommended in SYSTEM requiring high efficiency filtration.
SPECIFICATIONS
  • Type : Box/Flange.
  • Frame : AI Anodized/ GI/ SS 304..
  • Media : Synthetic Non Woven/Mufti layered synthetic netting
  • Supported by Expanded Metal (Aluminum/GI Mesh)
  • Gasket : Sponge/Foam/Felt.
    • Location : Downstream / Upstream /Both /None
  • Filter Classs :
    • Eurovent 4/5 : EU-3 EU-4
    • BSEN 779-2002 : G-3 G-4
    • ASHRAE 52.76-2007 : MERV:5- MERV:7-86
    • Average Arrestance : 80-90% 90-95%
    • Efficiency : 90% down to 10 Microns
  • Face Cuard (M/Sec) : Aluminium/ GI/ SS-Expanded /None
    • Location : Downstream / Upstream /Both /None
  • Separators : Aluminium / GI / SS
  • Sealing : Epoxy/Foam
  • Initial Pressure Drop : 5 MM of WC
  • Recommended Final Pressure Drop : 15 MM OF WC
APPLICATIONS
  • HVAC
  • Industrial Ventilation SYSTEMS .
  • Coarse filtration
  • Hotels & Hospitals
  • Pharmaceutical Industry
  • Electronics Industry
ADVANTAGES
  • Easy assembly
  • Cleanable and washable
  • Media is Fire retardand and resistant
  • Moisture, Fungi, Bacteria and Frost
  • Low initial pressure drop
  • High dust holding capacity
  • Optimum cost/ performance ratio.


PRE FILTERS-PLEATED TYPE
Primarily used to extend the life of the final filters, Pre filters are highly recommended in SYSTEM requiring high efficiency filtration.
SPECIFICATIONS
  • Type : Box/Flange.
  • Frame : AI Anodized/ GI/ SS 304..
  • Media : Synthetic Non Woven/Mufti layered synthetic netting
  • Supported by Expanded Metal (Aluminum/GI Mesh)
  • Gasket : Sponge/Foam/Felt.
    • Location : Downstream / Upstream /Both /None
  • Filter Classs :
    • Eurovent 4/5 : EU-3 EU-4
    • BSEN 779-2002 : G-3 G-4
    • ASHRAE 52.76-2007 : MERV:5- MERV:7-86
    • Average Arrestance : 80-90% 90-95%
    • Efficiency : 90% down to 10 Microns
  • Face Guard (M/Sec) : Aluminium/ GI/ SS-Expanded /None
    • Location : Downstream / Upstream /Both /None
  • Separators : Aluminium / GI / SS
  • Sealing : Epoxy/Foam
  • Initial Pressure Drop : 5 MM of WC
  • Recommended Final Pressure Drop : 15 MM OF WC
APPLICATIONS
  • HVAC
  • Industrial Ventilation SYSTEMS .
  • Coarse filtration
  • Hotels & Hospitals
  • Pharmaceutical Industry
  • Electronics Industry
ADVANTAGES
  • Easy assembly
  • Cleanable and washable
  • Media is Fire retardand and resistant
  • Moisture, Fungi, Bacteria and Frost
  • Low initial pressure drop
  • High dust holding capacity
  • Optimum cost/ performance ratio.


FINE FILTERS-MICROVEE TYPE
Used for high level pre filtration in HVAC, Paint booths, Air Handing units etc. filters are designed for reliablity and long service life under difficult operating conditions including high velocity and Turbulence The rigid media pack is not affected by changes in air flow or repeated fan shutdown.
SPECIFICATIONS
  • Type : Box/Flange.
  • Frame : AI Anodized/ GI/ SS 304.
  • Media : Synthetic Non Woven/glass Fbre /HDPE/Wooden
  • Media Support: AI Expanded /GL or SS Mesh
  • Gasket : Sponge/Foam/Felt.
    • Location : Downstream / Upstream /Both /None
  • Face Guard (M/Sec) : Aluminium/ GI/ SS-Expanded /None
    • Location : Downstream / Upstream /Both /None
  • Separators : Aluminium / GI / SS
  • Sealing : Epoxy/Foam
  • Initial Pressure Drop : 12 MM of WC
  • Recommended Final Pressure Drop : 25 MM OF WC
APPLICATIONS
  • General Filtration for HVAC .
  • Industrial Ventilation SYSTEMS .
  • Pre filtration to high efficiency filters.
  • Industries like Pharmaceutical, Electronic, Chemical process,Food process ets.
ADVANTAGES
  • Easy assembly
  • Synthetic non woven media is fire retardant and resistant to moisture, fungi, bacteria & front.
  • Cleanable and washable
  • Low initial pressure drop
  • High dust holding capacity
  • Optimum cost/ performance ratio.


HEPA FILTERS
High Efficiency Particulate Air Filters are the most efficient air filters commercially available. Used primarily in "clean rooms" and areas which require the very highest levels of contamination control.
SPECIFICATIONS
  • Type : Box/Flange.
  • Frame : AI Anodized/ GI/ SS 304.
  • Media : Micro Fibre Glass Paper (Imported)
  • Gasket : Sponge/Foam/Felt.
    • Location : Downstream / Upstream /Both /None
  • Filter Standard : BSEN 779-2002: H-13,H-14
  • Efficiency at MPPS : 99.95-99.995 %
  • Efficiency at DOP : 99.997-99.999%
  • Face Guard (M/Sec) : Aluminium/ GI/ SS-Expanded /None
    • Location : Downstream / Upstream /Both /None
  • Separators : Aluminium Foild
  • Sealing : Epoxy
APPLICATIONS
  • Clean Room Application .
  • Laminar Flow units .
  • Pharmaceuticals & Hospitals.
  • Nueclear Industries.
  • Research Laboratories .
  • Microelectronic Industry .
  • Food processing Industries.
  • Space research centers.
ADVANTAGES
  • Easy assembly
  • Large filtration area for longer life.
  • Low initial pressure drop
  • High dust holding capacity
  • Optimum cost/ performance ratio.
  • Individually Peack tested.


HYDRAULIC FILTERS
Used to eliminate the impurities and other contaminants from the oil at various conditions like high, medium, low pressure, highly viscous and highly contaminated oil.
FILTERS ARE CATEGARIZED AS:
  • Suction Strainers :
  • Return Line Filters :
  • Pressure Line Filters :
  • Filter Media & Micron Rating :
    • Imported Glass Fibre-3 to 25 Microns
    • Stainless Steel Mesh -5 to 200 Microns
APPLICATIONS
  • Hydraulic Oil .
  • Coolant .
  • Cutting Oil.
  • Lubricant.
ADVANTAGES
  • Imcreased equipment efficiency
  • Enhanced machine & oil life.
  • Butter miantained oil viscosity
  • Reduced frictional equipment wear